1.
Selectable measurement accuracy
・ 0.036 degree ・ ・ ・ 0 to 3599 degrees
・ 0.36 degree ・ ・ ・ 0 to 35999 degrees
・ 3.6 degrees ・ ・ 0 to 359999 degrees
・ 36 degrees ・ ・ 0 to 3599999 degrees
2.
No power supply is required at all times by measuring the angle with a mechanical mechanism.
A mechanism that does not use a storage device ensures that there is no loss of location information.
3.
Maintains high environmental resistance.
Clears 30G earthquake resistance and 92G shock resistance.
基本情報Multi-turn angle sensor "MAS"
Power supply voltage: DC12V-10% ~ 24V + 15% Ripple (p-p) 5% or less
Current consumption ... 60mA or less / DC 24V
Output code: RS-232C / RS-485
Output type: Open collector output
Output capacity: sink current: 35 mA or less
Operating temperature range: -10 to + 70 ° C (with no icing)
Operating humidity range: 35 to 95% RH (however, no condensation)
Insulation resistance: 0.1 MΩ or more at 100 V DC megger (between ground and DC)
Vibration resistance: 30G
Shock resistance: Shock resistance 92G
価格情報 | 数量により価格は変動します |
---|---|
納期 |
お問い合わせください
※数量によって納期が変動しますので、お気軽にお問い合わせください。 |
型番・ブランド名 | MASシリーズ |
用途/実績例 | Earthquake resistance, oil proof, dust proof, dust proof, etc. are required A place where harsh modern industries can play an active part. Forging machinery related, industrial machinery related, heavy duty material handling related Steel related, Printing related, textile related, measuring equipment related, renewable energy related etc. It is active in various industrial fields where durability and robustness are required. |
取扱企業Multi-turn angle sensor "MAS"
-
鍛圧機械専用カウンター製造企業として歩んで 来ましたWAKOだからこそ、出来る事があります。 今まで培ってきました経験・ノウハウが業界各社様に 認めて頂き、経験・品質・性能を有する製品であると 信頼を受けております。 私たちの今日まで作り続けてきました製品は、 鍛圧機械の衝撃振動:Gとの戦いと言っても過言では ありません。 高速プレス機械では、300~4000SPMという超高速周期振動 が発生します。この振動を制する為には、機械構造の 各機構の部品一つ一つ細部にわたり人の手により 組み立し各調整を行う必要があります。 そして、私たち和光精機はこの半世紀にわたり培った 技術・ノウハウを集結し、ここに、 機械式機構とデジタル信号出力機構を融合した H・A・E-GS <Hybrid Absolute Encoder GS> を開発しました。 Global Standardであり続ける為に WAKOは進化を続けます。
Multi-turn angle sensor "MAS" へのお問い合わせ
お問い合わせ内容をご記入ください。